The serious barista’s dream machine. In a compact footprint, Slayer Single Group packs the same commercial head, steam valves, and brew actuator as its predecessors – plus a few extras. With a new touchscreen interface that assists in flavor profiling and temperature management, you’re looking at a one-group espresso machine with unprecedented capability.

Enjoy the best that your espresso has to offer with Slayer’s signature flow control. In both manual and semi-automatic modes, the Single Group divides extraction into multiple stages and manipulates flow rate to highlight the inherent sweetness of espresso. Extreme grind fineness, made possible by patented pre-brew technology, lends to extraordinary body and beautiful crema. Around the world, professional and amateur baristas alike are making exceptional coffee with the Slayer Single Group.

Ideal for: Espresso bars, small restaurants, catering events and your kitchen.


  • European Ash wood handles and actuators
  • Glass touchscreen display
  • Automatic shot timers
  • Adjustable brew temperature
  • Shot mirror
  • Hot water tap
  • Non-slip feet
  • Variable flow rate
  • Personalized steam pressure with PID & customizable wand tip
  • Dual tanks with power management
  • Pre-heat coil for brew temperature stability
  • Commercial portafilter with 58mm, 18g basket
  • Direct plumb
  • Certified ETL Sanitation* (conforms to NSF/ANSI Standard 4)

Product Highlights

Commercial brew group, 58mm portafilter with patented Needle Valve technology for Flavor profiling.

Prepare extraordinary espresso and steam milk simultaneously with our dual boiler design.

Extreme grind fineness increases the surface area in the grounds, extending body and creating a visually stunning espresso

Slayer’s Patented Flavor Profile Technology allows the barista to flavor profile and find that at times elusive sweet

Achieve perfect, microfoam and even latte art with our commercial steam wand assembly.


Technical Highlights
  • Commercial version 3 grouphead rated to 1 million cycles before maintenance
  • Bottomless (“naked”) chrome-plated, brass portafilters
  • 58-millimeter portafilter baskets
  • Teflon-coated screens shower evenly & clean easily
  • Universal stainless steel group bayonet
  • PID temperature & pressure control, adjustable in 0.1º increments (Celsius or Fahrenheit)
  • 1.1-millimeter, 4-hole steam wand tip
  • Steam pressure transducer
  • Saturated group with auto-bleed
  • Internal gear pump
  • Direct plumb only
  • Certified ETL Sanitation* (conforms to NSF/ANSI Standard 4’)
Weight & Dimensions


  • Body: 18.1 inches / 46.0 centimeters
  • Foot to foot: 17.7 inches / 45.0 centimeters


  • Body: 24.3 inches / 61.7 centimeters
  • Foot to foot: 17.5 inches / 44.4 centimeters
  • Rear panel (top) to disengaged steam actuator (top): 11.2 inches / 28.5 centimeters


  • Top of rear panel: 12.8 inches / 323.8 millimeters
  • Top of brew actuator: 13.4 inches / 340.3 millimeters
  • Top of engaged steam actuator: 14.5 inches / 368.3 millimeters
  • Group height, drip tray to portafilter: 4.7 inches / 119.4 millimeters


  • Dry: 100.0 pounds / 45.5 kilograms
  • Wet: 110.0 pounds / 49.9 kilograms
  • Shipping: 160.0 pounds / 72.60 kilograms
Tank Capacities
  • Brew tank: 1.1 liters
  • Steam tank: 3.3 liters
  • Pre-heat coil: 60.0 milliliters
Power & Electric
  • 110 volts / 15 amps OR 220 volts / 10 amps
  • 600-watt brew tank heating element
  • 1,300-watt steam tank element for 110-volt option; 2,000-watt for 220-volt option
Installation Requirements


  • Minimum load capacity: 70.0 kilograms / 150.0 pounds
  • Hole for power/water/ drain: 5.0 centimeters / 2.5 inches diameter


  • Water line: dedicated 3/8-inch British Standard Pipe (BSP), cold with shut-off valve*
  • Incoming water pressure: 3-5 Bar / 43-72 PSI
  • Incoming flow rate: 1.5 gallons per minute
  • Drain: open gravity drain located within 4.0 feet / 1.2 meters
  • Included accessories: 5/8-inch / 15.88-millimeter drain hose with hose clamp AND 60-inch x 3/8-inch / 152.4-centimeter x 9.53-millimeter braided steel hose

Water Treatment

  • Hardness: not to exceed 50 parts-per-million
  • Total dissolved solids: 75-125 parts-per-million

*In North America, use 3/8 inch compression to 3/8 inch National Pipe Thread (NPT) male fitting and cross-thread into 3/8 inch BSP water line.

Video: Inside the Slayer Espresso Single Group

What sets apart Slayer's Single Group espresso machine? Exceptional craftsmanship, advanced features, and patented technology that helps you Make Coffee Better. With numerous options for personalization, your espresso machine will look right at home in your own kitchen or cafe.


The personalization tool puts you in the driver’s seat as the designer.  Customize the body panels (side and rear), powder coat the X’s and select your own wood set for the actuators. It’s your very own kitchen cafe!

Explore More

(Additional fees and build lead times may apply).